|
Specification
|
|
- Form Factor
|
Mini-ITX form factor at 170 x 170 mm
|
|
- CPU
|
Onboard Intel® ULV Celeron M 600Mhz
@ 400 MHz FSB uFCBGA CPU
|
|
- Memory
|
One 184-pin DIMM socket
Support up to 1 GBytes DDR 266 SDRAM
|
|
- Chipset
|
Intel® 82852GM GMCH and 82801DB ICH4
|
|
- Real Time Clock
|
Intel® ICH4 built-in RTC with onboard lithium battery
|
|
- Watchdog Timer
|
Programmable generates NMI or system reset watchdog timer with 1 to 255 sec. / min. of time out value
|
|
- Power Management
|
ACPI 1.0 compliant, supports power saving mode with ATX PSU
|
|
- PCI Enhanced
IDE
|
Dual UltraATA/100 bus master IDE channels Support up to 4 ATAPI devices on 40-/44-pin IDE ports Jumper selectable Vcc power output on 40-pin IDE1 for power cable free DiskOnModule flash disk
|
|
- VGA Interface
|
Intel® 852GM GMCH built-in Intel Extreme Graphics 2 with 266 MHz VGA core and 256-bit 3D engine Intel® Dynamic Video Memory up to 64 MB shared with system External DB15 female connector on rear I/O panel
|
|
- LVDS Interface
|
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2 with onboard Chrontel CH7017A built-in LVDS transmitter Resolution up to 1400 x 1050 SXGA+ Support 24-bit Dual channel LVDS TFT LCD Onboard 20-pin Hirose DF13-20DP-1.25V connector
|
|
- TV-out Interface
(Optional) |
Intel® 852GM GMCH built-in Intel® Extreme Graphics 2 with MA-SDTV Mini-AGP add on card
|
|
- LAN Interface
|
Intel® 82541PI Gigabit Mbps Ethernet interface
|
|
- Audio Interface
|
Intel® ICH4 with onboard ACL650 AC97 3D audio codec 5.1 channel, line-in, line-out, Mic-in, CD-in and S/P DIF interface
|
|
- PCMCIA Interface
|
PCI RICOH R5C475II PCMCIA PC card / CardBus controller Comply with PCMCIA V.2.10 and JEIDA 4.2 Specification 16-/32-bit data bus, support hot swap function Mix and Match 5V/3.3V PC Card, 16/32 Card, 3.3 CardBus Card One PCMCIA type-I/II slot
|
|
- Hi-Speed USB 2.0
|
Intel® ICH4 chipset built-in Hi-Speed USB 2.0 interface with 480 Mbps of data transfer rate and bootable setting in BIOS
|
|
- Multi-I/O Port
|
2 x COM port, 1 x parallel, 6 x USB 2.0, 1 x IrDA, 1 x FDD, 1 x PS/2 keyboard and mouse port
|
|
- Solid State
Disk
|
CompactFlash Card CompactFlash socket supports CompactFlash Card (CFC) Support PIO mode 4 up to 16.6 MBytes of data transfer rate Default setting as secondary IDE port at master mode Bootable, driver free IDE-based flash disk Flash memory capacity up to 1 G Bytes (and beyond)
DiskOnModule Flash Disk IDE-based, bootable, driver free DiskOnModule flash disk PIO mode 4 with 16.6 Mbps of data transfer rate Flash memory capacity up to 1 GB ytes (and beyond)
|
|
- Extended Interface
|
One 32-bit PCI slot supports 2 bus master PCI via riser card, and Mini-PCI or Mini-AGP port can be used optionally
|
|
- External I/O Port
|
Back panel : PS/2 keyboard and mouse port, VGA, parallel port, Dual COM port, Speaker-out, SPDIF, LAN, Dual USB2.0, DC power input. Front panel : MIC, Line in & earphone or Central/Base, Rear & Front audio outputs and 2 x Dual USB port
|
|
- Environment
|
> Power Requirement
: Single 19V 6A DC input or 12V 10A DC input Board >
Board Dimension : 170mm x 170mm with standard Mini-ITX form factor > Operation
Temperature : 0 ~ 60oC (32 ~ 140oF)
|